eWheel | size S

Our eWheel size S is our small motor for extremely compact designs, ideal for your compact driverless transport system. The built-in motor has no IP rating and is a powerful external rotor motor with 11 pole pairs. It also has an encoder with 1024 increments and integrated Hall sensors. This means that our eWheel has a redundant sensor system and that the speed can be reliably detected by the corresponding electronics (SLS and SDI) by comparing the two signals. Furthermore, our small size is also extremely overload-capable.

eWheel size S - on-board voltage 24V
eWheel size S - on-board voltage 48V

Motor designS-24V
Gearbox varianti11i20i30
Gear reduction11,420,030,0
Nominal voltage [V]242424
Nominal current [Aeff]121212
Maximum current [Aeff]]383838
Maximum torque [Nm]295075
Parking brake torque [Nm]356090
Payload per wheel [kg]500500500
Wheel/motor protection classIP69/IP00IP69/IP00IP69/IP00
Maximum
speed
with wheel Ø (m / s)
Ø 140 mm1,81,00,7
Ø 160 mm1,21,20,8
Ø 200 mm2,61,51,0

Motor designS-48V
Gearbox varianti11i20i30
Gear reduction11,420,030,0
Nominal voltage [V]484848
Nominal current [Aeff]999
Maximum current [Aeff]272727
Maximum torque [Nm]336090
Parking brake torque [Nm]356090
Payload per wheel [Kg]500500500
Wheel/motor protection classIP69/IP00IP69/IP00IP69/IP00
Maximum
speed
with wheel Ø (m / s)
Ø 140 mm2,11,20,8
Ø 160 mm2,81,40,9
Ø 200 mm3,01,71,2

Product options

Wheel covering

Our standard wheel covering is made of Vulkollan® with a hardness of 92° Shore A. However, wheel coverings made of Vulkollan® 70° Shore A or other crowns are also conceivable and possible. Vulkollan® is a polyurethane traded by the company Covestro AG. Other materials and Shore hardnesses proven in intralogistics are also possible.

Antriebsräder Größen, wheel drives sizes

Assembly flange,

With our eWheel, we offer you the option of mounting it either from the outside or the inside of the vehicle itself. This type of mounting is always available and is part of our standard range. You choose the mounting direction, whether you want to screw the eWheel on from the outside or the inside. On this basis, we then select the appropriate mounting flange during production. In addition to our eWheel, we can also offer you a standardized mounting bracket to attach our eWheel conveniently under your vehicle chassis. This allows you to simply screw the AGV/AGV above our eWheel.
Montage Antrieb in FTS

Drive controller

Our double-axis controller has STO (Safe Torque Off) in accordance with PL e and can therefore be a component of your functional safety concept for your AGV. The controller is voltage-resistant up to 60V with a peak current of 60A. Our standard interface for the double-axis controller is CANopen. You therefore need one dual-axis controller for two eWheels per AGV.

Please contact us for further information!

Antriebsregler Platine

Do you have any questions or would you like advice?

We will be happy to answer any questions you may have and look forward to hearing from you.

You can reach us Mon – Thu from 8 am to 5 pm and Fri from 8 am to 2 pm.

Skip to content